Jobox - Delta Consolidated 1-656990 Job Site Storage Chest (48"L x 30"W x 33-3/8"H)
NOTE: PURCHASE FIVE OF THIS ITEM, SHIPPING WILL BE FREE. YOU MUST CALL US @ 1.800.429.3289 FOR THIS TO BE APPLIED
Usable cubic feet: 24.3
Unmatched Security, Versatility and Durability Site-Vault Security System
Nearly 50% stronger than competitive locking systems:
* 3-Point lock engagement is virtually impossible to bend or pry open
* Fluorescent orange tape indicates when the chest is unlocked
* Bolt cutter proof padlock housing
* Patent Pending
EZ-Loader Skid Bolsters:
* Fork lift-accessible from all sides
* 7-Gauge, one-piece steel bolster construction resists damage when dropped
* Bolsters are fully welded to the box and feature deep embossed reinforcement
* Casters install with 5/16" self-tapping bolts
* Patent pending
Site-Vault Security System:
* 3-Point lock engagement
* Three locking points versus competitive locking systems that only feature two locking points
* Padlock is completely housed in a fully-welded 12-gauge steel casing making it impossible to knock out during an attempted break-in
* Fluorescent orange tape indicates when the chest is unlocked, making it easy to check at night and from a distance
* Patent pending
EZ-Loader Skid Bolsters:
* Forklift accessible from all sides
* Easily load and unload heavy chests from trucks
* Safely move heavy chests to upper levels of buildings
* One piece skid bolster construction reinforces entire box end for heavier load capacity
* Patent pending
Heavily reinforced lid:
Lid bolster resists bending from cargo placed on top of the box and from attempted break-ins
Recessed handles:
Extra tall and deep recess areas prevent pinched fingers and damage to the handle
Grip Rite channels:
Easy to grip the lid when wet or wearing gloves
Also provides lid reinforcement
Heavy-Duty locking arms:
1" wide locking arm resists bending and locks lid securely into position
Staked and welded hinge:
Rugged 14-gauge steel 3/8" continuous hinge with 1/4" steel pin and extra-large 1" knuckles
Staked and welded pin cannot be driven out
Full-Length lock console with three locking points
Bolt cutter proof lock system
Grip Rite channel
Full-Length lid bolster
Fully welded padlock housing
Formed lid sides welded to lid bolster
Fully staked and welded hinge with 3/8" hinge, 1/4" pin and 1" knuckles
45-degree locking arms
Corner gussets
Recessed handles
Side forklift access
Reinforced bolster corners
Full-Length reinforcing channel
7-Gauge one-piece steel bolster with caster holes
|
Texture Tools & Supplies 
