Jobox Drop-Front Piano Lid Job Site Storage Box (74"L x 30"W x 50"H)
Jobox - Delta Consolidated 1-684990 Drop-Front Piano Lid Job Site Storage Box (74"L x 30"W x 50"H)
Usable cubic feet: 56.5
Drop-Front Piano Boxes feature reinforced door for easy loading and unloading of heavy equipment
Full-length stainless steel hinge resists corrosion
Pad-lockable drop down door prevents access to heavy tools and equipment while the piano box is open
Efficient tapered ramp design makes it easy to roll heavy objects into storage
Unmatched Security, Versatility and Durability Site-Vault Security System
Nearly 50% stronger than competitive locking systems:
* 3-Point lock engagement is virtually impossible to bend or pry open
* Fluorescent orange tape indicates when the chest is unlocked
* Bolt cutter proof padlock housing
* Patent Pending
EZ-Loader Skid Bolsters:
* Fork lift-accessible from all sides
* 7-Gauge, one-piece steel bolster construction resists damage when dropped
* Bolsters are fully welded to the box and feature deep embossed reinforcement
* Casters install with 5/16" self-tapping bolts
* Patent pending
Site-Vault Security System:
* 3-Point lock engagement
* Three locking points versus competitive locking systems that only feature two locking points
* Padlock is completely housed in a fully-welded 12-gauge steel casing making it impossible to knock out during an attempted break-in
* Fluorescent orange tape indicates when the chest is unlocked, making it easy to check at night and from a distance
* Patent pending
EZ-Loader Skid Bolsters:
* Forklift accessible from all sides
* Easily load and unload heavy chests from trucks
* Safely move heavy chests to upper levels of buildings
* One piece skid bolster construction reinforces entire box end for heavier load capacity
* Patent pending
2X thicker side walls:
Full pry bar and weather resistant design allows the lid to overlap side walls when closed
Two deep side wall storage bins
Recessed handles:
Extra tall and deep recess areas prevent pinched fingers and damage to the handle
Tilt-N-Stow shelf:
Bottom shelf lifts up and makes it easy to load and unload objects from the base
Gas spring lid lift guard:
Gas springs embedded in sidewall and guard design protect springs, strenthens sidewall and provides 17% more useable shelf space
Staked and welded hinge:
Rugged 14-gauge steel 3/8" continuous hinge with 1/4" steel pin and extra-large 1" knuckles
Staked and welded pin cannot be driven out
Full-Length lock console with three locking points
Recessed handles
Formed lid sides welded to lid bolster resists pry bar entry
Fully staked and welded hinge with 3/8" hinge, 1/4" pin and 1" knuckles
EZ-Loader Skid bolster
Form-in reinforcements strengthen skid bolsters
Door opens a full 90-degrees
Site-Vault with bolt cutter proof lock housing
Fully welded padlock housing
Quick release gas spring removal
Built-in storage bins
Lower front panel to reduce lifting
Tilt-N-Stow shelf
Uses 5/16" self-tapping screws for caster installation
7-Gauge one-piece steel bolster with caster holes
|
Texture Tools & Supplies 
